Shaping and Polishing of Composite Resin Teeth
Shaping and Polishing of Composite Resin Teeth
GRISH Polishing Strips and Disks are used for shaping and polishing of composite resin teeth. Grit sizes of abrasives are distinguished by colors. Customized grits and colors are available.
Specifications
| Products | Particle size | Base Material | Abrasive material | Specification |
| Polishing strip single grit size | Purple- 50 µm Blue- 30 µm Green- 20 µm Pink-12 µm | PET | Alumina | 4mm * 152mm |
| Polishing strip with dual grit size | ||||
| Hose polishing disks | Φ=14mm & 12mm, Abrasive coating on both face. | |||
| Air hole polishing disks | Φ=14mm & 12mm, Abrasive coating on single face. | |||
Remark: Customizations are available upon requests.
Features
1. Product will not damage and tincture composite resin while polishing.
2. Ultra-thin, elastic and closely attach to the tooth surface.
3. There is a blank in the middle of strip in order to insert into the gap between the teeth which prevent damage to adjacent surfaces.
4. The recommended rotating speed is 5000~10000 rpm/min and Contact Pressure 0.3~0.6 N.
Recommended using order:
Purple > Blue > Green > Pink.
 |  |  |
|
| Dental Polishing Strip & Disk |
