Shaping and Polishing of Composite Resin Teeth

Shaping and Polishing of Composite Resin Teeth

Shaping and Polishing of Composite Resin Teeth

Picture Keywords


GRISH (Teeth joy) Polishing Strips and Disks are used for shaping and polishing of composite resin teeth. Grit sizes of abrasives are distinguished by colors. Customized grits and colors are available.


Specifications

Products Particle size Base Material Abrasive material Specification 
Polishing strip single grit size

Purple- 50 µm

Blue- 30  µm

Green- 20  µm

Pink-12  µm 

PET Alumina 4mm * 152mm 
Polishing strip with dual grit size
Hose polishing disks 

Φ=14mm & 12mm, 

Abrasive coating on both face.  

Air hole polishing  disks 

Φ=14mm & 12mm, 

 Abrasive coating on single face. 

Remark: Customizations are available upon requests.


Features

1. Product will not damage and tincture composite resin while polishing. 

2. Ultra-thin, elastic and closely attach to the tooth surface. 

3. There is a blank in the middle of strip in order to insert into the gap between the teeth which prevent damage to adjacent surfaces. 

4. The recommended rotating speed is 5000~10000 rpm/min and Contact Pressure 0.3~0.6 N.


Recommended using order:

Purple > Blue > Green > Pink.

Picture KeywordsPicture KeywordsPicture Keywords



抛光条抛光碟200-200.jpg

Dental Polishing Strip & Disk












Tel
Products
Applications
Sample Apply